DAP SessionMix 12 DSPA

Live Mixer 12-kanaals DAP SessionMix 12 DSPA
Merk: DAP Audio Artikelnr: D2196
• 12-Channel inputs
• 4 mono MIC inputs
• 4 stereo Line Inputs
• Built-in DSP module, with 99 pre-sets;
Echo+Verb, Tremolo, Plate, Leslie,
Vocal, Rotary, Small Room,
Flanger+Verb, Large Hall
• Extremely high headroom offering enough
dynamic range
• Extra low distortion pre-amp section
• Better performance with excellent
noise figures
• High quality potentiometers & HQ
smooth faders
• Robust construction for long time operation
• Foot-switch for effect remote control
• 48V Phantom power switch (on backside)
HQ Switched Power Amplifier:
Rated Power output: 2 x 300W / 4 Ohm
(1 kHz sine 1% THD+N) RMS
2 x 200W / 8 Ohm (1 kHz sine
1% THD+N) RMS

4 Microphone Channels, each channel with:
• Gold plated XLR connector and
1/4" Jack are both provided for the
Mic signal inputs
• Up to 40 dB range Trim control
• Low cut switch at 75 Hz, with
18 dB/oct. slope
• Insert facility for extra signal processing
• Warm, natural 3 bands EQ, with the MID
centre frequency sweepable
• AUX send buses for external effects
or monitoring
• AUX-1 can be switched between post-fader
and pre-fader
• AUX2 can be changed to pre-fader
• Peak LEDs on each channel
• Mute/ALT 3-4 output bus option
• Solo function for level setting
of each channel

4 Stereo Channels, Each Channel with:
• Only Left input for mono application
• Operating level switch: +4 dBu
for professional equipment inputs, and
-10 dBV for HIFI
• 3 Band EQ with the sophisticated
centre frequency
• AUX-1 can be switched between post-fader
and pre-fader
• AUX-2 can be changed to pre-fader
• Peak LED's on each channel
• Mute/ALT 3-4 output bus option
• PFL Solo function for level setting
of each channel

MAIN Section:
• Built-in DSP module,
• Track inputs, with its independent level
control, assignable to Main Mix bus
or Control Room/Headphone output
• Stereo AUX Returns can be used as
the additional line inputs
• 2x12 segment LED ladder for output
level display
• Main Mix source matrix: ALT 3-4
and 2-Track
• Control Room source matrix: Main Mix,
ALT 3-4 and 2-Track
• Balanced TRS and XLR Outputs
• 48V Phantom power switch

Mono input channels:
Mic 1-4 input: Electronically balanced
Freq. response: 20 Hz - 22 kHz, +/- 1 dB
Distortion (THD +N): <0,03% at +0 dB, 1 kHz
Gain Range: 0 dB - 40 dB (Mic)
SNR: >85 dB
Line input: Electronically balanced
Sensitivity range: +15 dB ~ -25 dB

Stereo input channels:
Line input: Electronically balanced
Frequency response: 20 Hz - 22 kHz, +/- 1 dB
Distortion (THD +N): <0,03% at +0 dB, 1 kHz

Impedance's:
Input impedance: 10 kilo-Ohm
Out impedance: 120 Ohm
Tape out: 1 kilo-Ohm

Equalization:
Hi shelving: +/- 15 dB at 12 kHz
Mid bell: +/- 15 dB at 100 Hz - 8 kHz
(Mic Ch.)
+/- 15 dB at 3 kHz
& 500 Hz
(Stereo Ch.)
Low shelving: +/- 15 dB at 80 Hz
Low cut filter: 75 Hz, 18 dB/oct.

Main mix section:
Max. output: +22 dB u balanced XLR
+16 dB u unbalanced,
1/4 jacks
AUX return gain range: Off to +15 dB
AUX sends max. out: +15 dB

Power supply:
Input voltage: 210-240V, 50 Hz
Power consumption: 1150 W (max.)
Not 19"
Side flaps: not included
Dimensions (LxWxH): 427 x 425 x 161 mm
Weight: 10,58 kg

Klant recensies: